PRODUCTS
Automatic screw feeder
TES series automatic screw feeder
Roll over the image to view details.

Product name: TES series automatic screw feeder

Item number: TES series

TES series automatic screw feeder
Product introduction
TES series automatic screw feeder 
 
Product description
 
Applicable to several specifications screw with one equipment,1.0 - 5.0 adjustable (1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0), Applicable to special screws, 1:1 short screws, screws with washers
 
 
Product Details
 
1. Applicable to a variety of specifications of a machine screws
M1.0 - M5.0 adjustable (1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0) can be the use of special screws, 1:1 short screws and screws with washers
2. Adjust rail conveniently, the rail can be pulled out to be adjusted freely.
3. Easy to understand, easy to operate. No screw block phenomenon. 
4. Screws roll in the rotary drum to fall into the outlet. Screws not falling into rail will be moved to rotary drum and enter next cycle.
5. The machine working speed can be adjusted by adjusting the vibration strength to change the speed.
The screw reaching the dropout position will not vibrate, which will not disturb the working efficiency.
6. Failure alarm function available
7. Feeding and vibration drive is controlled independently
8. The ideal delay time can be set freely.
9. Under abnormal working status, the machine will start failure alarm.
10. Operation is as easy as other screw machine! 
11. When pick up screws, just need to aim the screw head position, put the screw driver tip into the guide bearing, slide along the guide bearing, and pull down the screw towards your body position.

Related Products